THIOMAX 0-0-25-17 Thiomax-K™ is a neutral to basic, chlorine- free, clear liquid solution, containing 25% potash and 17% sulfur. Each gallon of Thiomax-K™ contains 3 pounds of potash (K20) and 2.1 pounds of sulfur. Thio-max-K™ can be applied by drip, sprinkler, or ﬂood irrigation. It may be blended with other fertilizers or applied as a foliar treatment on selected crops. When used as a foliar fertilizer, Thiomax-K™ should ﬁrst be diluted with water before applying blends of Thiomax-K™. Should not be acidiﬁed below a pH of 6.0. STARTER FERTILIZER: Apply 1 to 4 gallons of Thiomax-K™ per acre by itself or with other starter fertilizers, at least 2 inches below and 2 inches to the side of the seed. POP-UP FERTILIZER: Wheat and other small grains apply 2 to 4 quarts per acre by itself or with other liquid pop-up fertilizers. CORN AND COTTON: Apply 2 to 4 quarts of Thiomax-K™ per acre by itself or with other liquid pop-up fertilizers. TOMOTOES AND SMALL SEED CROPS: Apply 2 to 4 quarts of Thiomax-K™ per acre by itself or with other liquid Pop-Up fertilizers. SIDEDRESS: Thiomax-K™ may be surface banded or knife injected as a source of potassium and sulfur. Rates may vary between 1 and 20 gallons Per Acre. To ensure compatibility with foreign products, a jar compatibility test is recommended. Always fill tank with water first, then add product while tank is circulating. NEVER MIX CONCENTRATES DIRECTLY TOGETHER, Not compatible with high concentrated Calcium, Phosphate, carbon or low pH mixes.